•To use the installer without the master disk, change code 2 offset 175c from
66 to 60
No MasterDisk
CODE 2, Offset 1752
6632 -> 6032
RamCharger
v8.1
1HU18-7M33E-M3KC3
v8.0.1
00601 5R001 C2M23
v3.0
NTEA-QPCC-WAAY-ANLSB
v2.1J
BPKB-LLLD-CBAD-JNFOB
v2.1.x
ZUMZ-TZBZ-QZZH-ZZRUB
OTNA-QGQD-UEAD-OCKSB
OSOA-PFID-TOAU-GAJRB
v1.5.6
AVFA-SHAA-LLAO-LBPUA
AITA-FAAA-YGAH-LACHA
RAMDisk
v3.2.4
•Leave three blank spaces after your name to register
RandomNoise CODA
v
0Y-A45CK-ILINK-CAKD (Begins with zero not O)
162x-20dk1-gik92-2569
v1.0
0YA45CKILINKCAKD
RapidCD
v1.0.4
0300-0400-7863-5382
RapidTrak
v
600001201
Rapscallion
v2.0.x
Name : Inpher
Copies: 31337
Code : INFR-10J0-6862
v2.0.2
Name : NiceBunsChrisco
Copies: 1
Serial: 2222-7174-0E88
RAW Bar
v3.0
EIRL9-EOP2Q-B3C3S
Ray Dream Designer
v5.01
3D-501-2-4750-54899
v5.0
SM-00002-0-1-54637
v4.1
RD-403-1-9999-24894
DM-410-1-1433-57131
v4.0.3fc6
SM-00000-0-1-54633
SM-00001-0-1-54569
SM-00002-0-1-54637
DM-403-1-2051-31836
DM-403-1-2116-14832
v4.0
RD-403-1-9999-24894
v4.0J
DW-405-1-1349-3096
v3.1.1
RDD5-1230-48398
RD-301-1-2116-14832
RD-300-1-7537-49443
v3.11J
RD-311-1-3809-41477
v3.1J
RD-312-1-1675-41118
Ray Dream Studio
v5.5
SM-00002-0-1-54637
SM-00000-0-1-54633
SM-00001-0-1-54569
v5.0.1
3D-501-2-4750-54899
v5.0
SM-00002-0-1-54637
v5.0J
ST-500-1-3324-59147
v4.1
DM-410-1-1433-57131
Needs SN: Follows this pattern:
DM-nnn-n-nnnn-nnnnn
(n = number)
v4.1J
DW-414-1-4684-1980
v4.03fc6
SM-00000-0-1-54633
SM-00001-0-1-54569
SM-00002-0-1-54637
v4.0.3fc
DM-403-1-2051-31836
DM-403-1-2116-14832
4 Elements: 4E-100-01-1801-22085
Funpack: 3D Fun Pack: FP-100-1-1737-45089
Professional Lens Pack: LP-100-1-1843-42914
SuperMesh: ZA-100-1-1357-56203
RayGun
v2.1
1072-0100-01137327-453231-663683
v1.1.0
1072-0100-03132324-460242-579236
†You must download the plug-in installer for intended target program (Deck II, Peak, Premiere, Digital Performer, Studio Vision, etc) from www.arboretum.com to use the above number.
ReadMe Generator
v1.x
RMG-98-25
ReadySetGrow!
v1.0
20475
Reaktor
v2.0.3
200 11833 67923
•needs 100 mb "enigma" file
Real Audio Pro
v2.1.1
0094-26-7618
1000-00-1000
0094-32-4766
REAL DEAL® Video Poker
vAll
Password: elvisiskingvivalasvegas
Real PC
v?
3100-0000-0740
10-4526-1253-003
v1.0
3100-0000-3067-1746
3100-0000-4172-2233
3100-0000-7658-1041
v1.0J
3100-5001-5746-8207
Real Player Plus
v7 plus
0600-06-0030
vG2
1196-84-5869
0684-96-5548
v6.0 (G2b)
0600-06-0030
0000-00-2668
0600-03-0300
v5.0
0094-32-4766
v4.0
0094-26-7618
0620-62-2858
Real VR
SN: A017913276
The "trac number" is 10137
RealAudio
v2.1.1:
0094-26-7618
vPlus
0094-32-4766
1000-00-1000
RealBasic
v2.2.1
H76H-A7GA-0CG7-4F88-E
v2.1
H76H-A7GA-0CG7-4F88-E
v2.02J
7C9G-08G9-6HFG-616A-A
v2.0.2
H76H-A7GA-0CG7-4F88-E
v2.0.1
70G5-5FEE-78C1-CCF7-4
v2.0
see note for this numbers!
Level 1 = 0000-0000-0014-5775-A Standard Register
Level 2 = 0000-0000-0014-A635-0 Standard Register
Level 3 = 0000-0000-0014-0A96-H Upgrade from Standard to Pro
Level 4 = 0000-0000-0015-3022-8 Professional Edition
v2d65
00-8102-48843-423
v2beta
86-0348-78117-340
v1.1
91-2577-71877-370
v1.0
01-7103-10112-036
60-3487-91187-340
91-2577-71877-370
v1.0f9
81-4505-48145-053
v1.0f1
00-0102-40043-423
48-8126-14792-696
vAll
01-7103-18112-036
v?
12-1155-81748-166
15-8765-31358-254
00-8102-48843-423
99-0102-40843-423
99-0102-40943-423
v?
98-8102-48043-423
00-8102-48943-423
88-0102-49843-423
00-8102-48943-423
00-8102-48943-423
48-8126-14792-686
01-4505-41495-053
80-0102-48943-423
48-8126-10472-696
01-7103-11912-036
•2.0: Note:
#1
all of these SN's say they've registered the app...which they have. But when you compile the application...it says that the app is a demo.
#2
Once you register 2.0 with one of these numbers, you can no longer reregister the app - even if you delete the REALbasic2 Prefs file in the
preferences folder.
If you want to use a _real_ number in the future, use ResEdit to find and delete an invisible file in the Prefs folder called "Icon ". That will let you register REALbasic 2.0 again.
#3
For PPC:
In the data-fork, go look for the first occurence of: 01 B3 [xx xx] (in hex) where xx can be any number, propably based on the creation date.
Now, replace these values with: 01 00 00 00 (in hex) and if you've done it right, the timelimit should have vanished from your build.
For 68k:
Same as above, except you have to search for the hex values in the DATA-resource, item #2.
Realmz
v5.1
To register the main program, and consequently the first scenario, take your serial # and divide it by 24. Drop everything after the decimal point. Add 24 to this. Now multiply that by 15 and subtract 156. This is your registration #. To register the next three scenarios, use the following:
Prelude to Pestilence: Name: MoonDark Number: 175973540
Assault on Giant Mountain: Name: MoonDark Number: 403273572
Castle in the Clouds: Name: MoonDark Number: 181560444
You will notice that these numbers are 100 added to the registration codes for version 4.4.4 as in C&N. However, the numbers in C&N for Destroy the Necronomicon is NOT good, and I tend to doubt the other numbers for Griloch's Revenge and White Dragon will work either, as they are only 8 digits...
v5.x
Enter 617 instead of 911 to be able to enter the serial number and to your REGISTRATION number you must add 100 to it to make it valid. If it was 9678654 now it's 9678754.
v4.6.3
SN: 12345678
Code: 7716149
v4.2.2
Enter 911 as registration code to change your SN, then use
Serial Number: 999999999
Registration Code: 625000094
v4.1.1
To register Realmz enter 911 as Registration Code in the About Box and click on Register. Then you will be asked for a Serial Number, which is 1794683670. After this enter 1121677394 as Registration Code, click on Register, type in a name of your choice and you are done.
v3.1
To register Realmz enter 911 as Registration Code in the About Box and click on Register. Then you will be asked for a Serial Number, which is 13579246. After this enter 8487119 as Registration Code, click on Register, type in a name of your choice and you are done.
v3.0.x
SN#1888300270 RC#1180187748
Realmz Assault on Giant Mountain
v4.2.2
Name: MoonDark
Code: 403273572
v3.0
Name: Tim Phillips
Code: 1369115096
v2.x.x
Name: Anonymous
Code: RC#0705389594
Name: Tony Sanders
Code: RC#3000730738
Name: Larry Charles
Code: RC#3670562560
Realmz Castle In The Clouds
v4.2.2
Name: MoonDark
Code: 181560444
v3.0.1
Name: Tim Phillips
Code: 616398176
v2.x.x
Name: Anonymous'
Code: RC#0317578044
Name: Tony Sanders
Code: RC#1778615800
Name: Larry Charles
Code: RC#2080185120
Realmz Destroy the Necronomicon
v4.2.2
Name: MoonDark
Code: 34629785
v3.0
Name: Tim Phillips
Code: 117552804
Realmz Grilochs Revenge
v4.2.2
Name: MoonDark
Code: 60292014
Realmz Prelude to Pestilence
v4.2.2
Name: MoonDark
Code: 175973540
v2.5
Name: Tim Phillips
Code: 597431732
v2.x.x
Name: Anonymous
Code: RC#0307806044
Name: Cam Wayne
Code: RC#0387687056
Name: George Walton
Code: RC#3237769224
Realmz White Dragon
v4.2.2
Name: MoonDark
Code: 51623504
RealProducer Plus
vG2
212-08869-3226
RealVideoPlus
v4.0
0094-26-7618
Reanimator
v2.0.2
name: MoonDark
code: IBXKXKIFVXOUI-380
name: TIGER
code: HKXVCEQWNXQX-4612
Recall
v1.2
name: MoonDark
code: M-1612-ASF-19-022
RecoWrite
v1.0.2J
0819798346156
RecStrip
v1.x.x
Name: Inpher
Code: ICLXGFJD
Recycle
v1.7b
0237454790
Redneck Publisher
Registration ID : BUBBA
RedValveIt
v1.0
260492-01-490000066
Relax
v2.1.2
110-894012-1
Reliever
v2.6.2
EAC1111111217055
EAC1111111317056
EAC1111111417057
v2.6
EAC1111111117054
EAC1111111017053
v2.5.2
EAC1107519305965
v2.4
EAC1107519305965
EAC1000135081273
Reminder Pro
v3.2
ZAP-31284L-RMPR-3XX-96
Remus
v1.4
RB0N000
v1.4J
R64C02X
v1.4 Lite
L50A3SM
v1.3.2
RT0S0KE
RenderBoy
v2.0
name: MoonDark
code: 229414
v1.2
name: MoonDark
code: 229414
Renderman
v5.5
3273071853
4027723341
3574598582
2518174477
4011405915
v2.1
2182566625
v1.1
3273071853
4027723341
3574598582
2518174477
Renderworks
v1.0
4800M-DG-N5Q3N5V-002654
1702-HS3CC10S-W00000
1802M48MKK7H4A529354
•
Here's how to register RenderWorks.
You must have installed VectorWorks using the demo,
the original installer and the krack as found on Hotline.
Trash the "VectorWorks 8 prefs" file and the "LightWork preferences" file.
Now open VectorWorks, enter some cool name and org.
On next screen enter something cool as well.
Now VectorWorks asks if you want to register RenderWorks,
enter yet another cool thing, anything goes!
That's all there is to it.
In short, you have to install VectorWorks and RenderWorks at
the same time and the krack will work for both of'em!!!